Introducción

This guide is a helpful starting point for almost every hardware related replacement or installation. By exposing the internal components you will be able to repair, replace, or clean out the interior of your phone. While this process does require a few specific tools, they are widely available and do not require any previous experience to use them effectively.

  1. Remove the back of the phone by pushing firmly with your thumbs up towards the camera.
    • Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

    • Remove both the battery and the SD card (Press SD card in to release)

    • Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

  2. Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.
    • Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

    • Insert the flat end between the back and front enclosure, working your way around the rim.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    Todos somos Genios

    Share your repair story with #ImAGenius

  4. Gently  depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.
    • Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

    • It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

  5. Carefully separate the front and back enclosures once all of the clips have been disengaged. Be sure to not separate too quickly or you risk breaking an attached tab.
    • Carefully separate the front and back enclosures once all of the clips have been disengaged.

    • Be sure to not separate too quickly or you risk breaking an attached tab.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Max Brown

Miembro Desde 23/01/12

139 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 3-26, Amido Winter 2012 Miembro de Cal Poly, Team 3-26, Amido Winter 2012

CPSU-AMIDO-W12S3G26

5 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 2,015