Saltar al contenido principal

HTC EVO 4G Stand Replacement

Qué necesitas

  1. HTC EVO 4G Stand Replacement, Battery: paso 1, imagen 1 de 2 HTC EVO 4G Stand Replacement, Battery: paso 1, imagen 2 de 2
    • Remove the back case of the phone with a plastic opening tool by placing the tool in the tab on the back of the phone.

  2. HTC EVO 4G Stand Replacement: paso 2, imagen 1 de 2 HTC EVO 4G Stand Replacement: paso 2, imagen 2 de 2
    • Remove the battery from the phone by carefully lifting it out with your fingers.

  3. HTC EVO 4G Stand Replacement: paso 3, imagen 1 de 1
    • Set the battery aside for disposal. You are now ready to insert a new battery.

  4. HTC EVO 4G Stand Replacement, Stand: paso 4, imagen 1 de 1
    • you should remove the six T5 screws holding the Inner frame in place. Be careful not to loose the screws

  5. HTC EVO 4G Stand Replacement: paso 5, imagen 1 de 3 HTC EVO 4G Stand Replacement: paso 5, imagen 2 de 3 HTC EVO 4G Stand Replacement: paso 5, imagen 3 de 3
    • Using the plastic opening tools again, gently pry the inner frame apart from the rest of the phone

    • Remove the inner frame from the rest of the phone by lifting it off

  6. HTC EVO 4G Stand Replacement: paso 6, imagen 1 de 1
    • Remove the five screws that are holding the stand in place.

  7. HTC EVO 4G Stand Replacement: paso 7, imagen 1 de 1
    • Remove the stand from the frame by lifting it out. Clear any debis causing it to be jammed, or replace with new stand.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sage Jurado

Miembro Desde 03/13/14

1,128 Reputación

4 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 132