Repara tus cosas Comunidad Tienda

HTC Desire 610 Vibration Motor Replacement

Introducción

Has your HTC Desire 610 stopped vibrating? Follow these steps to replace the faulty vibration motor. You will learn how to take off the back, unscrew the circuit cover, unplug the vibration harness, and put in a new motor.

Qué necesitas

  1. HTC Desire 610 Vibration Motor Replacement, Black Plastic Circuit Cover: paso 1, imagen 1 de 3 HTC Desire 610 Vibration Motor Replacement, Black Plastic Circuit Cover: paso 1, imagen 2 de 3 HTC Desire 610 Vibration Motor Replacement, Black Plastic Circuit Cover: paso 1, imagen 3 de 3

    • Using a plastic opening tool, take off the back cover of the phone.

    Editar

  2. HTC Desire 610 Vibration Motor Replacement: paso 2, imagen 1 de 1

    • Remove the four black 4mm torx screws using the Torx T5 bit.

    Editar

  3. HTC Desire 610 Vibration Motor Replacement: paso 3, imagen 1 de 1

    • Remove the four silver 5mm torx head screws using the Torx T5 screwdriver.

    Editar

  5. HTC Desire 610 Vibration Motor Replacement: paso 4, imagen 1 de 1

    • Remove the two 2.5mm phillips head screws using the Phillips 000 screwdriver.

    Editar

  6. HTC Desire 610 Vibration Motor Replacement: paso 5, imagen 1 de 1

    • Remove the black plastic circuit cover using a plastic opening tool.

    Editar

  7. HTC Desire 610 Vibration Motor Replacement, Vibration Motor: paso 6, imagen 1 de 2 HTC Desire 610 Vibration Motor Replacement, Vibration Motor: paso 6, imagen 2 de 2

    • Pull the wire harness from the circuit board that is connected to the vibration motor using a pair of precision tweezers.

    • Be careful! Damaging this port could prevent a new vibration motor from functioning.

    Editar

  8. HTC Desire 610 Vibration Motor Replacement: paso 7, imagen 1 de 2 HTC Desire 610 Vibration Motor Replacement: paso 7, imagen 2 de 2

    • Pry the vibration motor from it's housing using precision tweezers.

    • The vibration motor is held in place with adhesive, so you may need to pry a little harder to remove it.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Kaycee Hammond

Miembro Desde 02/11/17

273 Reputación

2 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

IUPUI, Team S1-G1, Wilson Spring 2017 Miembro de IUPUI, Team S1-G1, Wilson Spring 2017

IUPUI-WILSON-S17S1G1

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 443