Saltar al contenido principal

HTC Desire 610 Charging Port Replacement

Qué necesitas

  1. HTC Desire 610 Charging Port Replacement, Black Plastic Circuit Cover: paso 1, imagen 1 de 3 HTC Desire 610 Charging Port Replacement, Black Plastic Circuit Cover: paso 1, imagen 2 de 3 HTC Desire 610 Charging Port Replacement, Black Plastic Circuit Cover: paso 1, imagen 3 de 3
    • Using a plastic opening tool, take off the back cover of the phone.

  2. HTC Desire 610 Charging Port Replacement: paso 2, imagen 1 de 1
    • Remove the four black 4mm torx screws using the Torx T5 bit.

  3. HTC Desire 610 Charging Port Replacement: paso 3, imagen 1 de 1
    • Remove the four silver 5mm torx head screws using the Torx T5 screwdriver.

  4. HTC Desire 610 Charging Port Replacement: paso 4, imagen 1 de 1
    • Remove the two 2.5mm phillips head screws using the Phillips 000 screwdriver.

  5. HTC Desire 610 Charging Port Replacement: paso 5, imagen 1 de 1
    • Remove the black plastic circuit cover using a plastic opening tool.

  6. HTC Desire 610 Charging Port Replacement, Charging Port: paso 6, imagen 1 de 1
    • Remove the 4mm black Torx screw using a Torx T5 screwdriver.

  7. HTC Desire 610 Charging Port Replacement: paso 7, imagen 1 de 1
    • Using a pair of tweezers, disconnect the antenna wire.

  8. HTC Desire 610 Charging Port Replacement: paso 8, imagen 1 de 3 HTC Desire 610 Charging Port Replacement: paso 8, imagen 2 de 3 HTC Desire 610 Charging Port Replacement: paso 8, imagen 3 de 3
    • Peel back the gray adhesive strip using the precision tweezers.

  9. HTC Desire 610 Charging Port Replacement: paso 9, imagen 1 de 1
    • Pull up on the white strip so it sits 90 degrees using a pair of precision tweezers.

  10. HTC Desire 610 Charging Port Replacement: paso 10, imagen 1 de 3 HTC Desire 610 Charging Port Replacement: paso 10, imagen 2 de 3 HTC Desire 610 Charging Port Replacement: paso 10, imagen 3 de 3
    • Pry up the circuit board and pull it out using a pair of precision tweezers.

  11. HTC Desire 610 Charging Port Replacement: paso 11, imagen 1 de 3 HTC Desire 610 Charging Port Replacement: paso 11, imagen 2 de 3 HTC Desire 610 Charging Port Replacement: paso 11, imagen 3 de 3
    • Remove the loud speaker using a pair of precision tweezers.

    • The loud speaker is attached with adhesive and may require more force than expected to remove.

    • The prongs on the speaker should be sticking up towards the top of the phone when you put the speaker on the new circuit board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Kaycee Hammond

Miembro Desde 02/11/17

273 Reputación

2 Guías creadas

Equipo

IUPUI, Team S1-G1, Wilson Spring 2017 Miembro de IUPUI, Team S1-G1, Wilson Spring 2017

IUPUI-WILSON-S17S1G1

4 Miembros

6 Guías creadas

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 1,218