Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four 1.2mm screws in each corner.
-
Use the suction cup and plastic opening tool to pry the screen from the body.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pry the battery up at these three spots, and disconnect the power cables attached.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
You can then fold the battery back like so, and that will give you access to the screw.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the screwdriver to remove the 1.2 mm screw at the bottom of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the screw and the black plastic backing are removed the daughterboard pulls right out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
In order to fix the Micro USB Port, the entire daughterboard will need to be replaced because all connections are soldered in.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.