Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tools to remove the plastic speaker covers that are attached through an adhesive layer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the T5 Torx screwdriver to remove the four screws in each corner.
-
Make sure to take out any SD cards, located on the left side of the phone before proceeding to the next step.
-
Use the plastic opening tool to pry the front of the device off. Fully go around the front with the plastic opening tool before attempting to pull it off.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Dislocate the small piece with the wires connected using a nylon spudger.
-
Loosen the adhesive layer for the battery by running a hair dryer over it briefly. After the adhesive is loosened you can pry the battery out with a plastic opening tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After prying, simply lift the battery up and out of the device.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
2 comentarios
Mi phone is sealed no scrows on my phone HTC Desire 530 so haw can i get the Battery out
My phone is sealed so awe can i get the Battery out it is HTC desire 530