Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
The purpose of this guide is to instruct the reader on how to replace the faceplates of their HP iPAQ H2200 device.
Qué necesitas
-
-
-
Unscrew the two bottom screws on LCD screen that were previously located under the main board.
-
-
-
Remove the faceplate by unscrewing the green screw located on the top right of the front faceplate.
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.