Saltar al contenido principal

HP eStation Zeen Volume Buttons Replacement

Qué necesitas

  1. HP eStation Zeen Volume Buttons Replacement, Volume Buttons: paso 1, imagen 1 de 3 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: paso 1, imagen 2 de 3 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: paso 1, imagen 3 de 3
    • Use a metal spudger to remove the four screw caps.

    • Remove the four 6 mm screws using a Philips #0 screwdriver.

  2. HP eStation Zeen Volume Buttons Replacement: paso 2, imagen 1 de 3 HP eStation Zeen Volume Buttons Replacement: paso 2, imagen 2 de 3 HP eStation Zeen Volume Buttons Replacement: paso 2, imagen 3 de 3
    • Insert a plastic opening tool and slide it along the edge to open the back panel.

    • Lift the back panel away from the device.

  3. HP eStation Zeen Volume Buttons Replacement: paso 3, imagen 1 de 1
    • Disconnect the battery clip with a plastic opening tool.

    • Be gentle as the connector is fragile.

  4. HP eStation Zeen Volume Buttons Replacement: paso 4, imagen 1 de 1
    • Remove the two 6 mm screws using a Philips #0 screwdriver.

  5. HP eStation Zeen Volume Buttons Replacement: paso 5, imagen 1 de 1
    • Pull the ribbon from the board.

    • Be gentle as the ribbon is fragile.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

dalton hale

Miembro Desde 09/26/16

503 Reputación

4 Guías creadas

Equipo

USF Tampa, Team 16-4, Eyestone Fall 2016 Miembro de USF Tampa, Team 16-4, Eyestone Fall 2016

USFT-EYESTONE-F16S16G4

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 4

Todo El Tiempo: 191