Saltar al contenido principal

Partes

No se especificaron partes.

  1. Este paso está sin traducir. Ayuda a traducirlo

    Using your Phillips #00 screwdriver, remove the two screws to loosen the fittings of the keyboard. One of the screws lies in the label.
    • Using your Phillips #00 screwdriver, remove the two screws to loosen the fittings of the keyboard.

    • One of the screws lies in the label.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Flip the laptop over to view the top and lift the screen up. There are sixteen clips holding the keyboard in place. Gently pry up each clip using a plastic opening tool. Once all clips are loose, lift the keyboard from the computer. Do NOT pull the keyboard up more than 2-3 inches as there is a film-material connecting the keyboard to the laptop.
    • Flip the laptop over to view the top and lift the screen up.

    • There are sixteen clips holding the keyboard in place. Gently pry up each clip using a plastic opening tool. Once all clips are loose, lift the keyboard from the computer.

    • Do NOT pull the keyboard up more than 2-3 inches as there is a film-material connecting the keyboard to the laptop.

  3. Este paso está sin traducir. Ayuda a traducirlo

    There is a small black latch holding the film-material in place. Flip the black latch up to release the film-material. Once flipped up, simply pull the film-material out from the laptop to release the keyboard. There are tiny prongs on the ribbon; it must be carefully removed and upon re-installation the prongs must be lined up exactly in each tiny track in order for the keyboard to work.
    • There is a small black latch holding the film-material in place.

    • Flip the black latch up to release the film-material. Once flipped up, simply pull the film-material out from the laptop to release the keyboard.

    • There are tiny prongs on the ribbon; it must be carefully removed and upon re-installation the prongs must be lined up exactly in each tiny track in order for the keyboard to work.

Linea de Meta

2 personas más completaron esta guía.

Jacob Kleinsorge

Miembro Desde 30/01/15

2,051 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 16-4, Watkins Winter 2015 Miembro de USF Tampa, Team 16-4, Watkins Winter 2015

USFT-WATKINS-W15S16G4

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 2,607