Saltar al contenido principal

Introducción

The HP TouchSmart 15-r015dx has a Cruus NSK-CN6SC keyboard.

Partes

No se especificaron partes.

  1. Turn off your laptop.
    • Turn off your laptop.

    • Ensure your laptop is off. Removing the keyboard while it is on may harm your laptop.

    • Flip upside down in order to release the keyboard.

  2. Remove the two Phillips screws securing the keyboard. One of the screws lies on/under the label.
    • Remove the two Phillips screws securing the keyboard.

    • One of the screws lies on/under the label.

  3. Flip the laptop back over and pull the screen up. There are 16 (sixteen) latches holding the keyboard in place. Gently pry the keyboard up using your plastic opening tool.
    • Flip the laptop back over and pull the screen up.

    • There are 16 (sixteen) latches holding the keyboard in place.

    • Gently pry the keyboard up using your plastic opening tool.

    • Don't pull the keyboard up more than 2-3 inches as there is a film-material connecting the keyboard to the laptop.

  4. There is a film-material connecting the laptop to the keyboard. There is a small black latch holding the film-material in place. Flip the black latch up to release the film-material.
    • There is a film-material connecting the laptop to the keyboard.

    • There is a small black latch holding the film-material in place.

    • Flip the black latch up to release the film-material.

    • Once flipped up, simply pull the film-material out from the laptop to release the keyboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Jacob Kleinsorge

Miembro Desde 30/01/15

1,907 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 16-4, Watkins Winter 2015 Miembro de USF Tampa, Team 16-4, Watkins Winter 2015

USFT-WATKINS-W15S16G4

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 12

Todo El Tiempo: 2,361