Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip over to view the bottom of the laptop in order to gain access the battery and the DVD±RW Drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
slide release switches inward towards each other to release battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
after sliding the release switches, pull battery towards yourself to remove battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
There is one screw holding the DVD±RW Drive in place. Use the #00 screwdriver to remove the screw.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The DVD±RW Drive is here. Remove by gently pulling it straight out.
-
After removal of the DVD±RW Drive, two screws are exposed and must be removed.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using your Phillips #00 screwdriver, remove the two screws to loosen the fittings of the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the laptop over to view the top and lift the screen up.
-
There are sixteen clips holding the keyboard in place. Gently pry up each clip using a plastic opening tool. Once all clips are loose, lift the keyboard from the computer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the black latch up to release the film-material. Once flipped up, simply pull the film-material out from the laptop to release the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the laptop over to view the bottom and remove the remaining screws from the bottom.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip your laptop over to view top and open it.
-
Remove the four screws and the two wires before removing the base of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your plastic opening tool to pry the base of the laptop off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
There are two screws holding the hard drive in place. Remove these screws.
-
Remove the hard drive by pulling it to the right like shown.
-
Cancelar: No complete esta guía.
37 personas más completaron esta guía.
3 comentarios
Two things to add:
1. The two screws hidden under the DVD drive on the edge of the case must be removed.
2. It's easier to unlatch the ribbons for the keyboard, trackpad, and power button than it is to try and work around them. There are holes in the laptop base right over the ribbon connectors, so it's easy to re-connect them.
I don't have the screws that hold the hard drive in place. Is there any way to get them seperatly?