Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew all the screws on the back of the laptop and remove the cover
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now, get a tissue and prepare for the sweat.
-
And melt any rivet from green marker to orange marker like. Try not to cut it off, or you might be in trouble to hold the metal cover
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Same process and keep melting the rest of the plastic rivets after the metal cover. This can easily going over 2 or 3 hours if you are not quick enough.
-
And if everything goes alright, you might eventually get the problem keyboard removed and put a new keyboard back in.
-
then, use your solder station the melt the plastic back to the keyboard.
-