Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Qué necesitas
-
-
Unscrew all the screws on the back of the laptop and remove the cover
-
-
-
-
Same process and keep melting the rest of the plastic rivets after the metal cover. This can easily going over 2 or 3 hours if you are not quick enough.
-
And if everything goes alright, you might eventually get the problem keyboard removed and put a new keyboard back in.
-
then, use your solder station the melt the plastic back to the keyboard.
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.
Equipo
