HP Stream 14-CB174WM Lower Case Replacement

Paso 1 Lower Case

HP Stream 14-CB174WM Lower Case Replacement, Lower Case: paso 1, imagen 1 de 2

HP Stream 14-CB174WM Lower Case Replacement, Lower Case: paso 1, imagen 2 de 2

Use an opening pick to gently pry up the edge of the rubber foot.
Grab the lifted edge of the foot and gently pull it away.
Repeat for the other rubber foot.
The oils on your skin can damage the adhesive on the rubber feet. Try not to touch the adhesive part of the feet with your hands.

Editar

Paso 2

HP Stream 14-CB174WM Lower Case Replacement: paso 2, imagen 1 de 2

HP Stream 14-CB174WM Lower Case Replacement: paso 2, imagen 2 de 2

Use a Phillips screwdriver to remove the eight 6.6 mm screws that secure the lower case.

Editar

Paso 3

HP Stream 14-CB174WM Lower Case Replacement: paso 3, imagen 1 de 3

HP Stream 14-CB174WM Lower Case Replacement: paso 3, imagen 2 de 3

HP Stream 14-CB174WM Lower Case Replacement: paso 3, imagen 3 de 3

Insert an opening pick in the seam between the lower case and chassis.
Slide the opening pick around the perimeter, prying every couple of centimeters as you go.
You will hear "snaps" of the lower case retaining clips releasing.
Continue prying around the entire perimeter until the lower case fully releases.
Lift off the lower case.