Repara tus cosas Comunidad Tienda

HP Stream 13-c110nr WLAN Module Replacement

Introducción

The WLAN repair guide will assist the user in removal and installation of the WLAN module for the HP Stream 13-c110nr.

Qué necesitas

  1. HP Stream 13-c110nr WLAN Module Replacement, Keyboard Assembly: paso 1, imagen 1 de 1

    • Close the device.

    • Remove AC adapter plug from electrical outlet.

    • Remove AC adapter from device.

    • Turn the device off.

    • Unplug all external devices from device.

    • If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

    Editar

  2. HP Stream 13-c110nr WLAN Module Replacement: paso 2, imagen 1 de 1

    • Turn the device upside down with the back facing towards you.

    Editar

  3. HP Stream 13-c110nr WLAN Module Replacement: paso 3, imagen 1 de 3 HP Stream 13-c110nr WLAN Module Replacement: paso 3, imagen 2 de 3 HP Stream 13-c110nr WLAN Module Replacement: paso 3, imagen 3 de 3

    • Use a pick to remove the two (2) large computer feet along the back edge of the device.

    • Use a pick to remove the two (2) small computer feet.

    • Use a pick to remove the one (1) screw cover.

    • Place rubber computer feet in safe place for reassembly.

    Editar

  4. HP Stream 13-c110nr WLAN Module Replacement: paso 4, imagen 1 de 3 HP Stream 13-c110nr WLAN Module Replacement: paso 4, imagen 2 de 3 HP Stream 13-c110nr WLAN Module Replacement: paso 4, imagen 3 de 3
    Herramienta utilizada en este paso:
    Magnetic Project Mat
    $19.95
    Comprar

    • Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.

    • Place the thirteen (13) screws on magnetic mat for reassembly.

    Editar

  5. HP Stream 13-c110nr WLAN Module Replacement: paso 5, imagen 1 de 1

    • Turn the device over with the front facing towards you.

    • Open the device as shown.

    Editar

  7. HP Stream 13-c110nr WLAN Module Replacement: paso 6, imagen 1 de 3 HP Stream 13-c110nr WLAN Module Replacement: paso 6, imagen 2 de 3 HP Stream 13-c110nr WLAN Module Replacement: paso 6, imagen 3 de 3

    • Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.

    • Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

    Editar

  8. HP Stream 13-c110nr WLAN Module Replacement: paso 7, imagen 1 de 1

    • Disconnect the Touchpad cable.

    Editar

  9. HP Stream 13-c110nr WLAN Module Replacement: paso 8, imagen 1 de 2 HP Stream 13-c110nr WLAN Module Replacement: paso 8, imagen 2 de 2

    • Disconnect the Keyboard Cable.

    Editar

  10. HP Stream 13-c110nr WLAN Module Replacement: paso 9, imagen 1 de 2 HP Stream 13-c110nr WLAN Module Replacement: paso 9, imagen 2 de 2

    • Disconnect the Power connector cable.

    Editar

  11. HP Stream 13-c110nr WLAN Module Replacement: paso 10, imagen 1 de 1

    • Remove the Keyboard/Top Cover from the device.

    Editar

  12. HP Stream 13-c110nr WLAN Module Replacement, WLAN Module: paso 11, imagen 1 de 2 HP Stream 13-c110nr WLAN Module Replacement, WLAN Module: paso 11, imagen 2 de 2

    • Disconnect the WLAN antenna cable from the WLAN module.

    Editar

  13. HP Stream 13-c110nr WLAN Module Replacement: paso 12, imagen 1 de 1

    • Remove one (1) Phillips P0 PM2.0x3.0 mm screw.

    • Place one (1) screw on magnetic mat for reassembly.

    Editar

  14. HP Stream 13-c110nr WLAN Module Replacement: paso 13, imagen 1 de 1

    • Remove the WLAN Module from device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 174