Saltar al contenido principal

HP Split x2 Trackpad Replacement

Qué necesitas

  1. HP Split x2 Trackpad Replacement, Trackpad: paso 1, imagen 1 de 3 HP Split x2 Trackpad Replacement, Trackpad: paso 1, imagen 2 de 3 HP Split x2 Trackpad Replacement, Trackpad: paso 1, imagen 3 de 3
    • Remove the bumpers at the back of the keyboard part.

    • Use a J1 screwdriver head to remove the 7mm screws underneath the bumpers.

  2. HP Split x2 Trackpad Replacement: paso 2, imagen 1 de 2 HP Split x2 Trackpad Replacement: paso 2, imagen 2 de 2
    • Use a J1 screwdriver head to remove the remaining 5mm screws at the back of the keyboard part.

  3. HP Split x2 Trackpad Replacement: paso 3, imagen 1 de 1
    • Use the opening tool to carefully remove the back cover of the keyboard.

  4. HP Split x2 Trackpad Replacement: paso 4, imagen 1 de 1
    • Use a J1 screwdriver head to remove the black 2mm screws along the top part of the trackpad

    • Using the same screwdriver head, remove the black 3mm screws along the bottom part of the trackpad

  5. HP Split x2 Trackpad Replacement: paso 5, imagen 1 de 1
    • Disconnect the ribbon cable and move it out of the way.

  6. HP Split x2 Trackpad Replacement: paso 6, imagen 1 de 1
    • Slide the trackpad out from underneath the ribbon cables.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jose Francisco

Miembro Desde 03/04/17

137 Reputación

1 Guía escrita

Equipo

IUPUI, Team S6-G6, Wilson Spring 2017 Miembro de IUPUI, Team S6-G6, Wilson Spring 2017

IUPUI-WILSON-S17S6G6

4 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 1,557