Saltar al contenido principal

HP Slate 8 Pro Rear Facing Camera Replacement

Qué necesitas

  1. HP Slate 8 Pro Rear Facing Camera Replacement, Rear Facing Camera: paso 1, imagen 1 de 2 HP Slate 8 Pro Rear Facing Camera Replacement, Rear Facing Camera: paso 1, imagen 2 de 2
    • Secure the suction cup to the center of the screen.

    • Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.

  2. HP Slate 8 Pro Rear Facing Camera Replacement: paso 2, imagen 1 de 1
    • Use the Spudger to disconnect the ribbon cable to the rear facing camera.

  3. HP Slate 8 Pro Rear Facing Camera Replacement: paso 3, imagen 1 de 1
    • Use the tweezers to pry the camera assembly away from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Andrew Hall

Miembro Desde 05/23/16

322 Reputación

3 Guías creadas

Equipo

IUPUI, Team 1-4, Renguette SU 2016 Miembro de IUPUI, Team 1-4, Renguette SU 2016

IUPUI-RENGUETTE-SU16S1G4

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 205