Saltar al contenido principal

HP ProOne 600 G1 Wi-Fi Adapter Replacement

Qué necesitas

  1. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: paso 1, imagen 1 de 2 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: paso 1, imagen 2 de 2
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. HP ProOne 600 G1 Wi-Fi Adapter Replacement: paso 2, imagen 1 de 2 HP ProOne 600 G1 Wi-Fi Adapter Replacement: paso 2, imagen 2 de 2
    • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

  3. HP ProOne 600 G1 Wi-Fi Adapter Replacement: paso 3, imagen 1 de 1
    • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

  4. HP ProOne 600 G1 Wi-Fi Adapter Replacement: paso 4, imagen 1 de 1
    • Remove the backplate by pulling it back towards you.

    • Small plastic tabs hold in the backplate, pull these up to remove it.

  5. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: paso 5, imagen 1 de 2 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: paso 5, imagen 2 de 2
    • Locate the Wi-Fi adapter at the top right corner of where the stand once was.

    • Unscrew the screws using the Philips #1 Screwdriver.

  6. HP ProOne 600 G1 Wi-Fi Adapter Replacement: paso 6, imagen 1 de 1
    • Remove wire tabs from the left side of the Wi-Fi adapter.

    • Remove the adapter

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Janelle Layman

Miembro Desde 10/01/15

258 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 1-20, Maness Fall 2015 Miembro de Cal Poly, Team 1-20, Maness Fall 2015

CPSU-MANESS-F15S1G20

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 26

Todo El Tiempo: 3,842