Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Push and hold the release tab on the right and left toward the center.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Push and hold the release tabs on the right and left toward the center again.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the two screws on the back of the laptop, holding the keyboard.
-
Remove the two screws using a Phillips #00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the connector strip between the keyboard and the laptop.
-
Pull the strip away from the connector until it unplugs.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Un comentario
thanks for that
sir i want original keyboard 440 G1
if u dont mine suggest me