Saltar al contenido principal

Introducción

How to remove the backplate of the HP ProBook 440 G1.

Herramientas

No se especificaron herramientas.

Partes

No se especificaron partes.

  1. Make sure the laptop is turned off  before you start. Push and hold the release tab on the right and left toward the center.
    • Make sure the laptop is turned off before you start.

    • Push and hold the release tab on the right and left toward the center.

  2. Pull the battery out. Pull the battery out.
    • Pull the battery out.

  3. Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora

    Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora
  4. Push and hold the release tabs on the right and left toward the center again. Push and hold the release tabs on the right and left toward the center again. Push and hold the release tabs on the right and left toward the center again.
    • Push and hold the release tabs on the right and left toward the center again.

  5. Slide the backplate off.
    • Slide the backplate off.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 9

Todo El Tiempo: 153