Saltar al contenido principal

HP Pavilion x2 10-n113dx Battery Replacement

Qué necesitas

  1. HP Pavilion x2 10-n113dx Battery Replacement, Battery: paso 1, imagen 1 de 3 HP Pavilion x2 10-n113dx Battery Replacement, Battery: paso 1, imagen 2 de 3 HP Pavilion x2 10-n113dx Battery Replacement, Battery: paso 1, imagen 3 de 3
    • Before starting, please turn off your laptop.

    • Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.

  2. HP Pavilion x2 10-n113dx Battery Replacement: paso 2, imagen 1 de 2 HP Pavilion x2 10-n113dx Battery Replacement: paso 2, imagen 2 de 2
    • Gently lift and remove the display panel from the assembly.

    • Remove the translucent yellow tape that covers the battery connector on the mainboard.

    • The tape will be in the way for a future step.

  3. HP Pavilion x2 10-n113dx Battery Replacement: paso 3, imagen 1 de 3 HP Pavilion x2 10-n113dx Battery Replacement: paso 3, imagen 2 de 3 HP Pavilion x2 10-n113dx Battery Replacement: paso 3, imagen 3 de 3
    • Flip up the small white colored locking flap using the tip of a spudger or your fingernail. Then the ribbon cable can be removed easily without much effort.

    • Carefully disconnect the white ribbon cable from the mainboard.

  4. HP Pavilion x2 10-n113dx Battery Replacement: paso 4, imagen 1 de 3 HP Pavilion x2 10-n113dx Battery Replacement: paso 4, imagen 2 de 3 HP Pavilion x2 10-n113dx Battery Replacement: paso 4, imagen 3 de 3
    • Carefully disconnect the battery cable from its connector on the mainboard.

  5. HP Pavilion x2 10-n113dx Battery Replacement: paso 5, imagen 1 de 3 HP Pavilion x2 10-n113dx Battery Replacement: paso 5, imagen 2 de 3 HP Pavilion x2 10-n113dx Battery Replacement: paso 5, imagen 3 de 3
    • Using the Phillips #0 screwdriver, carefully remove the 4 corner screws that hold the battery to the display panel.

    • 3 screws are 3.12 mm head, 2.40 mm length, and 1 screw is 5.85mm head, 2.5mm length.

    • Remove the battery from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Equipo

USF Tampa, Team S13-G4, Boczar Fall 2017 Miembro de USF Tampa, Team S13-G4, Boczar Fall 2017

USFT-BOCZAR-F17S13G4

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 39

Todo El Tiempo: 4,938