Introducción

The optical drive allows the laptop to connect with CDs and disc to transfer information. It also allows laptop to play video or songs from the CD

Partes

No se requieren partes.

  1. Flip the laptop to the back to locate the battery lock.
    • Flip the laptop to the back to locate the battery lock.

  2. The battery lock should have a battery symbol on it.
    • The battery lock should have a battery symbol on it.

    • Push the button to the left to release the battery.

    • Remove the battery from the device.

    • Use a Phillips #0 screw driver to loosen the screw. The screw will not detach from the cover.

    • Place your hand on the cover and slide the cover down.

    • Use your hand to lift the cover from the bottom right and slide the cover to the right to remove the cover.

    • Place one finger on the right side of the hard drive.

    • Push the hard drive to the left and lift the hard drive up to remove it from the device.

    • Disconnect the connecting part by pulling the part to the right.

    • Remove the hard drive from the device.

    • Remove the 2.5mm screw with a Phillips #0 screw drive.

    • Put one finger into the release hole and push to the left until part of the optical drive comes out from the left of the laptop.

    • Grab the optical drive and pull to the left to remove it from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Hai Lin

Miembro Desde 19/10/18

397 Reputación

4 Guías creadas

Equipo

UC Davis, Team S4-G6, Lore Fall 2018 Miembro de UC Davis, Team S4-G6, Lore Fall 2018

UCD-LORE-F18S4G6

3 Miembros

4 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 8

Todo El Tiempo: 29