Introducción

The smaller L-shaped back panel is just the icing of the cake. It covers the HDD and some other small screws that help keep the entire back panel in tact. This part of your device is very simple to remove.

Partes

No se requieren partes.

  1. Unscrew the two screws JIS #0 located on opposites sides of the panel.
    • Unscrew the two screws JIS #0 located on opposites sides of the panel.

    • Screws are attached to the panel and will not fully come out.

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Carefully pry off the L-shaped panel.
    • Carefully pry off the L-shaped panel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Robert Hamilton

Miembro Desde 01/03/18

1,051 Reputación

10 Guías creadas

Equipo

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 54