Introducción

This is a RAM replacement for HP Pavilion dv7t-7000.

Partes

No se requieren partes.

  1. Turn the computer off and disconnect if from all power sources.
    • Turn the computer off and disconnect if from all power sources.

  2. Slide the battery release switch to the left.
    • Slide the battery release switch to the left.

  3. Hold the release switch all of the way to the left and your other hand to pull the battery out.
    • Hold the release switch all of the way to the left and your other hand to pull the battery out.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Unscrew the single Phillips #00 screw.
    • Unscrew the single Phillips #00 screw.

    • Screw will not come out, it is connected to the panel

  6. Remove service hatch by sliding away from the computer and lifting up. Remove service hatch by sliding away from the computer and lifting up.
    • Remove service hatch by sliding away from the computer and lifting up.

  7. Push the retraining springs away from the RAM at the same time to unlock the RAM. Push the retraining springs away from the RAM at the same time to unlock the RAM.
    • Push the retraining springs away from the RAM at the same time to unlock the RAM.

  8. Pull the RAM out. Follow the same procedure for the additional RAM.
    • Pull the RAM out.

    • Follow the same procedure for the additional RAM.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 2

Todo El Tiempo: 70