Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

HP Pavilion dv7t-7000 Heat Sink Replacement

Qué necesitas

  1. HP Pavilion dv7t-7000 Heat Sink Replacement, Battery: paso 1, imagen 1 de 1
    • Turn the computer off and disconnect if from all power sources.

  2. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 2, imagen 1 de 1
    • Slide the battery release switch to the left.

  3. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 3, imagen 1 de 1
    • Hold the release switch all of the way to the left and your other hand to pull the battery out.

  4. HP Pavilion dv7t-7000 Heat Sink Replacement, Back Panel: paso 4, imagen 1 de 1
    • Unscrew the single Phillips #00 screw.

    • Screw will not come out, it is connected to the panel

  5. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 5, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 5, imagen 2 de 2
    • Remove service hatch by sliding away from the computer and lifting up.

  6. HP Pavilion dv7t-7000 Heat Sink Replacement, CD Drive: paso 6, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement, CD Drive: paso 6, imagen 2 de 2
    • Remove the single Phillips #00 screw.

  7. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 7, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 7, imagen 2 de 2
    • Pull CD drive out to remove.

  8. HP Pavilion dv7t-7000 Heat Sink Replacement, RAM: paso 8, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement, RAM: paso 8, imagen 2 de 2
    • Push the retraining springs away from the RAM at the same time to unlock the RAM.

  9. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 9, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 9, imagen 2 de 2
    • Pull the RAM out.

    • Follow the same procedure for the additional RAM.

  10. HP Pavilion dv7t-7000 Heat Sink Replacement, Hard Drive: paso 10, imagen 1 de 1
    • Remove the two Phillips #00 screws holding in the hard drive.

  11. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 11, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 11, imagen 2 de 2
    • Grab the black tab on the hard drive and pull left and then upwards to remove.

  12. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 12, imagen 1 de 1
    • Remove the four Phillips #00 screws holding the hard drive to its case.

  13. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 13, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 13, imagen 2 de 2
    • Slide the casing off of the hard drive.

  14. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 14, imagen 1 de 1
    • Unplug the hard drive from the device.

  15. HP Pavilion dv7t-7000 Heat Sink Replacement, Wi-Fi Card: paso 15, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement, Wi-Fi Card: paso 15, imagen 2 de 2
    • Use the flat end of a spudger to pop off the antenna connectors.

  16. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 16, imagen 1 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 16, imagen 2 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 16, imagen 3 de 3
    • Remove single Phillips #00 screw.

    • Pull the card out by hand.

  17. HP Pavilion dv7t-7000 Heat Sink Replacement, Keyboard: paso 17, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement, Keyboard: paso 17, imagen 2 de 2
    • Remove the single Phillips #00 screw.

    • Flip the laptop over.

  18. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 18, imagen 1 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 18, imagen 2 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 18, imagen 3 de 3
    • Wedge a spudger in between the keyboard and the upper bezel (nearest the screen).

    • Pry upward to release the keyboard clips.

    • The keyboard is plugged into the motherboard, so be careful not to pull out while lifting keyboard.

  19. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 19, imagen 1 de 1
    • Use the flat end of a spudger to flip up the black tab on the ZIF connectors.

    • Pull the ribbon cables out of the ZIF connectors.

    • Remove the keyboard.

  20. HP Pavilion dv7t-7000 Heat Sink Replacement, Palm Rest: paso 20, imagen 1 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement, Palm Rest: paso 20, imagen 2 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement, Palm Rest: paso 20, imagen 3 de 3
    • Flip the keyboard back over.

    • Remove the single Phillips #00 screw holding in the CD drive.

    • Pull out the CD drive.

  21. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 21, imagen 1 de 1
    • Remove the seventeen Phillips #00 screws securing the back panel to the laptop.

  22. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 22, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 22, imagen 2 de 2
    • Flip the laptop over.

    • Remove the single Phillips #00 screw.

  23. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 23, imagen 1 de 1
    • Remove the panel by lifting it up.

  24. HP Pavilion dv7t-7000 Heat Sink Replacement, Motherboard: paso 24, imagen 1 de 1
    • Remove the eleven Phillips #00 screws.

  25. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 25, imagen 1 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 25, imagen 2 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 25, imagen 3 de 3
    • Use the flat end of a spudger to disconnect all wires connected to the motherboard.

  26. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 26, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 26, imagen 2 de 2
    • Lift up the black tab on the ZIF connector with the flat end of a spudger.

    • Pull the ribbon cable out of the ZIF connector.

    • Remove the fan from the laptop.

  27. HP Pavilion dv7t-7000 Heat Sink Replacement, Heat Sink: paso 27, imagen 1 de 2 HP Pavilion dv7t-7000 Heat Sink Replacement, Heat Sink: paso 27, imagen 2 de 2
    • Once you have removed the motherboard, the heat sink is attached.

    • Flip over the motherboard/heat sink assembly.

  28. HP Pavilion dv7t-7000 Heat Sink Replacement: paso 28, imagen 1 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 28, imagen 2 de 3 HP Pavilion dv7t-7000 Heat Sink Replacement: paso 28, imagen 3 de 3
    • Remove the six screws holding the heat sink onto the motherboard.

    • Unplug the cord supplying power to the fan.

    • Pull the two pieces apart.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 660