Repara tus cosas Comunidad Tienda

HP Pavilion dv6t-1200 Disk Tray Replacement

Introducción

A disk tray is a piece of hardware that can help with many tasks at hand that can make the laptop run smoothly and being able to watch movies as well. When beginning the repair make sure to have a clean area as many things might fall out the disk tray itself.

The disc tray can be used for multiple things such as watching old movies or being able to download material in order to update your pc interface. It can also help clean out all the junk that was in your laptop and be able to make it run smoothly.

Qué necesitas

  1. HP Pavilion dv6t-1200 Disk Tray Replacement, Disk Tray: paso 1, imagen 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement, Disk Tray: paso 1, imagen 2 de 2

    • Locate the small hole on the right side of the disk tray next to the button.

    Editar

  2. HP Pavilion dv6t-1200 Disk Tray Replacement: paso 2, imagen 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: paso 2, imagen 2 de 2

    • Extend the paper clip into a straight line and insert it into the disk tray hole located next to the release button.

    • When the disk tray is removed, make sure to clean the general area with canned air.

    Editar

  4. HP Pavilion dv6t-1200 Disk Tray Replacement: paso 3, imagen 1 de 1

    • Flip the laptop to the other side and remove the four screws on the bottom of the disk tray using a Phillips #0 screwdriver.

    Editar

  5. HP Pavilion dv6t-1200 Disk Tray Replacement: paso 4, imagen 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: paso 4, imagen 2 de 2

    • Remove the metal plate and locate the bottom right tool for the disk tray.

    Editar

  6. HP Pavilion dv6t-1200 Disk Tray Replacement: paso 5, imagen 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: paso 5, imagen 2 de 2

    • Replace the motor piece that is being held and reclose the device.

    Editar

  7. HP Pavilion dv6t-1200 Disk Tray Replacement: paso 6, imagen 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: paso 6, imagen 2 de 2

    • After replacing the motor and the placing the metal tray apply a good amount of WD40.

    • Once all completed the disk tray should be working smoothly.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Daniel Pelayo

Miembro Desde 10/05/21

210 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

Equipo

CSU Los Angeles, Team 11-21, Grodsky Fall 2021 Miembro de CSU Los Angeles, Team 11-21, Grodsky Fall 2021

CSULA-GRODSKY-F21S11G21

1 Miembro

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 18

Todo El Tiempo: 257