Saltar al contenido principal

HP Pavilion dv6000 Speaker Bar Replacement

Qué necesitas

  1. HP Pavilion dv6000 Speaker Bar Replacement, Speaker Bar: paso 1, imagen 1 de 1
    • Make sure the laptop lid is closed, turn it over and remove the battery by moving the switch right to left.

    • there are three philips screws located on the surface where the writing is. remove those three screws.

  2. HP Pavilion dv6000 Speaker Bar Replacement: paso 2, imagen 1 de 1
    • turn the laptop right side up. Between the cover and case on the top right of the laptop and using a plastic sludger or a finger lift gently on the speaker cover as to disengage the clips.

    • Be sure not to pull hard or you may damage the ribbon cables.

    • From the side closest to the screen turn the cover towards yourself.

  3. HP Pavilion dv6000 Speaker Bar Replacement: paso 3, imagen 1 de 1
    • there is one connector from the speaker bar to a control board. Gently remove the cable.

    • There are two more screws attaching the speaker bar to the cover, remove these and take the speaker bar out.

  4. HP Pavilion dv6000 Speaker Bar Replacement: paso 4, imagen 1 de 1
    • you are now ready to replace or repair the speaker bar. I recomend purchasing a new one, they range anywhere from 5-15 dollars online.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Joba Fett

Miembro Desde 04/11/14

227 Reputación

1 Guía escrita

2 comentarios

how to fix speaker from board

kingsley Osunkwo - Contestar

Grazie siete bravissimi . Ce ne fossero persone come voi che altruisticamente mettono a disposizione la loro esperienza di riparazioni per gli altri!

Fernando Mancini

fernando mancini - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 14

Todo El Tiempo: 3,442