Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Loosen the screws using Phillips #01 screwdriver with the extension attached.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After removing the two screws securing the Hard Drive to the bottom case, remove the panel to reveal the hard drive.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the tab of the black Mylar film on the right hand side of the hard drive.
-
Gently grip it with your thumb and index finger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the Hard Drive to the right to loosen the it from the frame.
-
The left side of the hard drive will pop up and should slide out freely until you see the black connector on it's right side, connecting it to the computer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the Hard Drive over and grasp the Hard Drive with one hand as you grip the connector with the other hand to remove the connector from the hard drive.
-
Un comentario
Can I transfer the information on the hard drive to another computer? How? My laptop won’t turn on and I’ve tried everything.