Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the RAM on the bottom side of the laptop, the cover is secured by a 6 millimeter screw. Remove this with a Philips #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Underneath are the RAM boards. They are secured by two plastic clips each. Locate these to continue removal.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place your thumbs on two of the clips securing one board. Push outwards on the clips. This should pop the board up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Repeat on second board. When both are released, they should appear as they do in the picture.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The RAM should be easily removed once released from the plastic clips.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.