Saltar al contenido principal

Introducción

If your computer spends a lot of time rebooting, freezing, or shows the 'Blue Screen of Death', it is possible that your Random Access Memory (RAM) is to blame. A replacement will be necessary. Follow these steps after purchasing a new RAM to replace.

Partes

No se especificaron partes.

  1. Locate the RAM on the bottom side of the laptop, the cover is secured by a 6 millimeter screw. Remove this with a Philips #1 screwdriver.
    • Locate the RAM on the bottom side of the laptop, the cover is secured by a 6 millimeter screw. Remove this with a Philips #1 screwdriver.

  2. Underneath are the RAM boards. They are secured by two plastic clips each. Locate these to continue removal.
    • Underneath are the RAM boards. They are secured by two plastic clips each. Locate these to continue removal.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Place your thumbs on two of the clips securing one board. Push outwards on the clips. This should pop the board up.
    • Place your thumbs on two of the clips securing one board. Push outwards on the clips. This should pop the board up.

  5. Repeat on second board. When both are released, they should appear as they do in the picture.
    • Repeat on second board. When both are released, they should appear as they do in the picture.

  6. The RAM should be easily removed once released from the plastic clips.
    • The RAM should be easily removed once released from the plastic clips.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Windows 98 Product Key?

Dudefoxlive - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 54