Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Power off the device and disconnect from any power source.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the device upside down and ensure the back of the device is facing you.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Push both buttons towards one another simultaneously. The battery slightly pops out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use JIS #1 screwdriver to remove the eleven 6 mm screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the two screw holes that allow access to removing the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the device onto its side.
-
Using a heavy duty spudger, gently disengage the keyboard.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a plastic opening tool, release the keyboard clips.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Tilt the keyboard to expose the Zero Insertion Force connector to which the keyboard cable is attached.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the keyboard cable from the motherboard by detaching the Zero Insertion Force connector.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a JIS #1 screwdriver, remove the five 5mm screws.
-
Detach the power button cable.
-
Detach the touch pad cable.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a plastic opening tool, pry open the top cover.
-
Unscrew the two 5 mm screws using a JIS #1 screwdriver.
-
Gently, pull to detach the fan cable.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the eight 5 mm screws with the JIS #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unclip the WLAN cable out of its place to allow the motherboard room to move.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the motherboard from the bottom side of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using your thumbs, push out on the bracket.
-
When the memory module feels loose, pull up on the module.
-