Saltar al contenido principal

Introducción

This replacement guide will show how to replace the keyboard of an HP Pavilion 15-b109wm. This process will take between 10-20 minutes, if done correctly. Remember to take your time and do the steps correctly and gently to avoid parts breakage.

  1. Power off the device and disconnect from any power source.
    • Power off the device and disconnect from any power source.

  2. Turn the device upside down and ensure the back of the device is facing you.
    • Turn the device upside down and ensure the back of the device is facing you.

  3. Push both buttons towards one another simultaneously. The battery slightly pops out. Push both buttons towards one another simultaneously. The battery slightly pops out. Push both buttons towards one another simultaneously. The battery slightly pops out.
    • Push both buttons towards one another simultaneously. The battery slightly pops out.

  4. Pull out the battery from the device's battery slot. Pull out the battery from the device's battery slot. Pull out the battery from the device's battery slot.
    • Pull out the battery from the device's battery slot.

  5. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  6. Use JIS #1 screwdriver to remove the eleven 6 mm screws. Use JIS #1 screwdriver to remove the eleven 6 mm screws.
    • Use JIS #1 screwdriver to remove the eleven 6 mm screws.

  7. Locate the two screw holes that allow access to removing the keyboard.
    • Locate the two screw holes that allow access to removing the keyboard.

    • There is a keyboard sign beside both keyboard access holes.

  8. Turn the device onto its side.
    • Turn the device onto its side.

    • Using a heavy duty spudger, gently disengage the keyboard.

  9. Using a plastic opening tool, release the keyboard clips. Using a plastic opening tool, release the keyboard clips.
    • Using a plastic opening tool, release the keyboard clips.

  10. Tilt the keyboard to expose the Zero Insertion Force connector to which the keyboard cable is attached.
    • Tilt the keyboard to expose the Zero Insertion Force connector to which the keyboard cable is attached.

  11. Disconnect the keyboard cable from the motherboard by detaching the Zero Insertion Force connector. To detach the connector, release by lifting the black plastic tab up. To detach the connector, release by lifting the black plastic tab up.
    • Disconnect the keyboard cable from the motherboard by detaching the Zero Insertion Force connector.

    • To detach the connector, release by lifting the black plastic tab up.

Conclusión

To reassemble your device, follow these instructions in reverse order.

David Atunlute

Miembro Desde 30/10/18

241 Reputación

2 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 10

Últimos 30 Días: 17

Todo El Tiempo: 126