Repara tus cosas Comunidad Tienda

HP Pavilion 13-s128nr Back Panel Replacement

Introducción

This guide will be used for almost every other replacement guide for the HP Pavilion 13-s128nr. This is because this guide is used for opening up the HP Pavilion 13-s128nr to get to the interior parts.

Qué necesitas

  1. HP Pavilion 13-s128nr Back Panel Replacement, Back Panel: paso 1, imagen 1 de 2 HP Pavilion 13-s128nr Back Panel Replacement, Back Panel: paso 1, imagen 2 de 2

    • Use the iFixit opening tool to take off the rubber caps.

    • Remove the screws using the Phillips #0 screwdriver.

    Editar

  3. HP Pavilion 13-s128nr Back Panel Replacement: paso 2, imagen 1 de 1

    • Use the Jimmy to pry around the seam of the laptop.

    • Remove the back panel of the laptop.

    • Don't completely remove the back panel as there are ribbon cables that can be easily damaged if removed quickly.

    Editar

  4. HP Pavilion 13-s128nr Back Panel Replacement: paso 3, imagen 1 de 2 HP Pavilion 13-s128nr Back Panel Replacement: paso 3, imagen 2 de 2

    • Using the iFixit opening tool to lift the tabs holding in the cables connecting the keyboard to the motherboard.

    • Pull the cable from the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 781