Saltar al contenido principal

HP Officejet Pro 8625 Printhead Replacement

Qué necesitas

  1. HP Officejet Pro 8625 Printhead Replacement, Left Side Panel: paso 1, imagen 1 de 3 HP Officejet Pro 8625 Printhead Replacement, Left Side Panel: paso 1, imagen 2 de 3 HP Officejet Pro 8625 Printhead Replacement, Left Side Panel: paso 1, imagen 3 de 3
    • Remove the two 11.6 mm T9 screws from the right side of the back of the printer.

  2. HP Officejet Pro 8625 Printhead Replacement: paso 2, imagen 1 de 3 HP Officejet Pro 8625 Printhead Replacement: paso 2, imagen 2 de 3 HP Officejet Pro 8625 Printhead Replacement: paso 2, imagen 3 de 3
    • Pull down the front panel to expose the screws on the front.

    • Remove the one 11.6 mm T9 screw on the left side of the front face.

  3. HP Officejet Pro 8625 Printhead Replacement: paso 3, imagen 1 de 2 HP Officejet Pro 8625 Printhead Replacement: paso 3, imagen 2 de 2
    • Remove the side panel by pushing down and towards the back.

    • This step may be easier if the printer is laid on its side with the left side panel facing up.

  4. HP Officejet Pro 8625 Printhead Replacement, Printhead: paso 4, imagen 1 de 2 HP Officejet Pro 8625 Printhead Replacement, Printhead: paso 4, imagen 2 de 2
    • Remove the one 5.3 mm T9 screw.

  5. HP Officejet Pro 8625 Printhead Replacement: paso 5, imagen 1 de 2 HP Officejet Pro 8625 Printhead Replacement: paso 5, imagen 2 de 2
    • Remove the four connectors from the top of the motherboard.

  6. HP Officejet Pro 8625 Printhead Replacement: paso 6, imagen 1 de 2 HP Officejet Pro 8625 Printhead Replacement: paso 6, imagen 2 de 2
    • Remove the three 11.6 mm T9 screws from the top, back of the printer.

    • Remove the one 12.1 mm T9 screw from the top, back of the printer.

  7. HP Officejet Pro 8625 Printhead Replacement: paso 7, imagen 1 de 2 HP Officejet Pro 8625 Printhead Replacement: paso 7, imagen 2 de 2
    • Remove the 11.6mm T9 screw from the top left of the front of the printer.

  8. HP Officejet Pro 8625 Printhead Replacement: paso 8, imagen 1 de 1
    • Disconnect the display by pulling down on the plastic hinge.

    • Gradually apply more force to the hinge and don't worry about the hinge or display breaking.

  9. HP Officejet Pro 8625 Printhead Replacement: paso 9, imagen 1 de 3 HP Officejet Pro 8625 Printhead Replacement: paso 9, imagen 2 de 3 HP Officejet Pro 8625 Printhead Replacement: paso 9, imagen 3 de 3
    • Lift the display as high as it will allow to expose the back of the display.

    • Remove the connector by pinching the sides and pulling away from the printer.

    • Remove the connector by pulling both away from the display and towards the printer.

  10. HP Officejet Pro 8625 Printhead Replacement: paso 10, imagen 1 de 2 HP Officejet Pro 8625 Printhead Replacement: paso 10, imagen 2 de 2
    • Remove the two 11.6 mm T9 screws from beneath the display.

  11. HP Officejet Pro 8625 Printhead Replacement: paso 11, imagen 1 de 1
    • Remove the top of the printer by lifting it from both sides.

  12. HP Officejet Pro 8625 Printhead Replacement: paso 12, imagen 1 de 3 HP Officejet Pro 8625 Printhead Replacement: paso 12, imagen 2 de 3 HP Officejet Pro 8625 Printhead Replacement: paso 12, imagen 3 de 3
    • Locate the printhead on the right side of the printer.

    • Pull the white tab on the right side of the printhead up, by pushing on the side of the printer a little bit.

    • Remove the printhead by lifting it out of the housing.

    You need to tell HOW to remove connectors - pull up or out etc>

    Richard Grassi - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Cam Engle

Miembro Desde 10/08/18

531 Reputación

3 Guías creadas

Equipo

Cal Poly, Team S13-G3, White Fall 2018 Miembro de Cal Poly, Team S13-G3, White Fall 2018

CPSU-WHITE-F18S13G3

3 Miembros

14 Guías creadas

5 comentarios

This printhead is normally user replaceable.

No screwdrivers are required.

This video is for an 8600, but the process is the same.

https://www.youtube.com/watch?v=i-IluLvF...

Andy - Contestar

I used these instructions to repair the guide ribbon for the print head. It had come off after a sheet of high tack labels got jammed in the printer. Just saved myself from having to buy a new printer! Thanks!!!

Robert de Salazar - Contestar

12 steps not necessary. Just open the front (like changing ink) and lift the grey lever referenced in step 12, then remove the head from the carriage.

bwaaronj - Contestar

Correct. So easy.

hinz -

BWAARONJ, I did exactly what you suggested in my 8625 three times! Now my printer is in pieces and parts, and I cannot get the printhead to release from the right side of the housing. I was very meticulous in making an effort to correct this problem, but, alas, it appears I will have to get a new printer!

Shelia Guy Bozeman - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 17

Ultimos 30 días: 64

Todo El Tiempo: 7,688