Saltar al contenido principal

HP Officejet Pro 6835 Cover Disassembly

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. HP Officejet Pro 6835 Cover Disassembly, HP Officejet Pro 6835 Cover Disassembly: paso 1, imagen 1 de 1
    • Open the main lid as far as it will go.

    • Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.

    • Open the lid further.

  2. HP Officejet Pro 6835 Cover Disassembly: paso 2, imagen 1 de 3 HP Officejet Pro 6835 Cover Disassembly: paso 2, imagen 2 de 3 HP Officejet Pro 6835 Cover Disassembly: paso 2, imagen 3 de 3
    • Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise.

    • The two screws above the screen assembly are deep so you may need a long screwdriver.

  3. HP Officejet Pro 6835 Cover Disassembly: paso 3, imagen 1 de 1
    • Grab the main cover and lift it up slightly.

    • Do not pull too hard—there is a cable connecting the cover to the printer.

  4. HP Officejet Pro 6835 Cover Disassembly: paso 4, imagen 1 de 2 HP Officejet Pro 6835 Cover Disassembly: paso 4, imagen 2 de 2
    • Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jake Park

Miembro Desde 01/24/18

465 Reputación

2 Guías creadas

Equipo

Cal Poly, Team S2-G4, Livingston Winter 2018 Miembro de Cal Poly, Team S2-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G4

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 65