Saltar al contenido principal

HP Officejet Pro 6230 Printer Power Adaptor Replacement

Qué necesitas

  1. HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: paso 1, imagen 1 de 2 HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: paso 1, imagen 2 de 2
    • Turn the printer around and locate the back panel for power.

    • Note: If you are unsure where the panel is located, look in the back right corner. The panel has “100-240V~50/60 Hz 700 mA” inscribed on it.

  2. HP Officejet Pro 6230 Printer Power Adaptor Replacement: paso 2, imagen 1 de 1
    • Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.

    • Note: Rotate the screw counterclockwise to loosen. Keep it in a safe place.

  3. HP Officejet Pro 6230 Printer Power Adaptor Replacement: paso 3, imagen 1 de 1
    • Remove the HP AC Power Adapter from the slot.

  4. HP Officejet Pro 6230 Printer Power Adaptor Replacement: paso 4, imagen 1 de 1
    • Locate the blue/green/red wire attached to the back of the adapter.

  5. HP Officejet Pro 6230 Printer Power Adaptor Replacement: paso 5, imagen 1 de 1
    • Unplug the current adapter from the wire.

    • Grasp the end of the connector, not the wires, to pull it out.

  6. HP Officejet Pro 6230 Printer Power Adaptor Replacement: paso 6, imagen 1 de 1
    • Affix the new adapter to the same wire.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Natalie Carmona

Miembro Desde 01/28/17

101 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 16

Todo El Tiempo: 1,082