HP Officejet 4630 Fax Feeder Replacement

Introducción

If your device will not fax, one possible solution is to replace the fax feeder. The fax feeder is necessary for sending more than one page of a fax at a time, and if it is malfuctioning, the printer may not fax at all.

Qué necesitas

Paso 1 Fax Feeder

HP Officejet 4630 Fax Feeder Replacement, Fax Feeder: paso 1, imagen 1 de 2

HP Officejet 4630 Fax Feeder Replacement, Fax Feeder: paso 1, imagen 2 de 2

Lift the fax feeder cover until it stands on its own.

Editar

Paso 2

HP Officejet 4630 Fax Feeder Replacement: paso 2, imagen 3 de 3

Use the plastic opening tool to unclasp the hinge that holds the feeder cover.

Editar

Paso 3

Lift the green tab to remove the fax feeder from the printer.

Editar

Paso 4

HP Officejet 4630 Fax Feeder Replacement: paso 4, imagen 3 de 3

Use the plastic opening tool to pry the pivot point apart while lifting the feeder up.
There is still a cable holding the part to the rest of the printer.

Editar

Paso 5

Use a screwdriver to remove the single 9mm T10 screw.
Remove the wire cover and pull the wire away from the printer. The fax feeder head is now free to be separated from the printer.

Editar