Introducción

Installing a new WiFi card is quick and simple.

The WiFi card in the HP Mini 210 uses a Mini PCIe interface, which is the de-facto standard on recent laptops. Please ensure you install an official HP verified wireless card to prevent running into errors.

Turn off and unplug the netbook before replacing the battery. Hold the netbook top-side down with the lid closed.
  • Turn off and unplug the netbook before replacing the battery.

  • Hold the netbook top-side down with the lid closed.

  • Slide the plastic battery release latches towards the lock symbols.

  • The left tab unlocks completely, but you will need to hold the right tab towards the lock symbol as you remove the battery.

Agregar Comentario

Slide the battery out from the netbook.
  • Slide the battery out from the netbook.

Agregar Comentario

Turn the netbook to view its edge.
  • Turn the netbook to view its edge.

  • Press both orange eject buttons simultaneously, and use a spudger to pry off the back case.

Agregar Comentario

If the back case does not separate from the netbook easily, use the spudger to pry off the back case by the edge near the battery compartment, and work your way to the sides. The case will then pivot along the front edge.
  • If the back case does not separate from the netbook easily, use the spudger to pry off the back case by the edge near the battery compartment, and work your way to the sides. The case will then pivot along the front edge.

Agregar Comentario

Pull the back case off from the front edge.
  • Pull the back case off from the front edge.

Agregar Comentario

Pop out the two gold connectors from the antenna wires on top of the WiFi card using a plastic opening tool.  This will allow you to dislodge the WiFi card from the rest of the netbook.
  • Pop out the two gold connectors from the antenna wires on top of the WiFi card using a plastic opening tool. This will allow you to dislodge the WiFi card from the rest of the netbook.

Agregar Comentario

Remove the two 3.9 mm screws on top of the WiFi card using the Phillips #00 screwdriver.
  • Remove the two 3.9 mm screws on top of the WiFi card using the Phillips #00 screwdriver.

Agregar Comentario

Gently pull the WiFi card out of its slot. Be sure to pull the card up and out of the slot towards you.
  • Gently pull the WiFi card out of its slot. Be sure to pull the card up and out of the slot towards you.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Heather Freed

Miembro Desde 06/10/12

591 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 9-17, Amido Fall 2012 Miembro de Cal Poly, Team 9-17, Amido Fall 2012

CPSU-AMIDO-F12S9G17

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 37

Todo El Tiempo: 3,728