Saltar al contenido principal

Introducción

The internal cooling fan is responsible for maintaining optimal operational conditions for the HP Media Center 876x processor. If your computer will not turn on, or will turn off randomly, then the internal fan may require replacement.

Partes

No se especificaron partes.

  1. Remove the two (9 mm) hand screws on the back panel. Remove the two (9 mm) hand screws on the back panel.
    • Remove the two (9 mm) hand screws on the back panel.

  2. Place the tower on its side. Slide the side panel horizontally to detach, and pull upward to remove. Slide the side panel horizontally to detach, and pull upward to remove.
    • Place the tower on its side.

    • Slide the side panel horizontally to detach, and pull upward to remove.

  3. Apply great pressure with fingers on the tabs of the fan casing. While applying pressure, pull the casing upwards to remove.
    • Apply great pressure with fingers on the tabs of the fan casing.

    • While applying pressure, pull the casing upwards to remove.

  4. Simultaneously pull the four corner tabs outward. Grab the center of the fan and slide it, smoothly, outward.
    • Simultaneously pull the four corner tabs outward.

    • Grab the center of the fan and slide it, smoothly, outward.

  5. Remove the fan completely from its casing. Take care not to damage any plastic parts or wires.
    • Remove the fan completely from its casing.

    • Take care not to damage any plastic parts or wires.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Clemson, Team 6-1, Benson Spring 2014 Miembro de Clemson, Team 6-1, Benson Spring 2014

CLEM-BENSON-S14S6G1

3 Miembros

15 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 363