Saltar al contenido principal

Introducción

The CMOS battery is the source of the initial power used in turning the computer on. If your HP Media Center 876x will not turn on, the CMOS battery may need replacement.

Partes

No se especificaron partes.

  1. Remove the two (9 mm) hand screws on the back panel. Remove the two (9 mm) hand screws on the back panel.
    • Remove the two (9 mm) hand screws on the back panel.

  2. Place the tower on its side. Slide the side panel horizontally to detach, and pull upward to remove. Slide the side panel horizontally to detach, and pull upward to remove.
    • Place the tower on its side.

    • Slide the side panel horizontally to detach, and pull upward to remove.

  3. Identify the CMOS battery.
    • Identify the CMOS battery.

  4. Pull battery, in a rolling motion, out of its slot. Pull battery, in a rolling motion, out of its slot. Pull battery, in a rolling motion, out of its slot.
    • Pull battery, in a rolling motion, out of its slot.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Clemson, Team 6-1, Benson Spring 2014 Miembro de Clemson, Team 6-1, Benson Spring 2014

CLEM-BENSON-S14S6G1

3 Miembros

15 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 11

Todo El Tiempo: 833