Introducción

These steps will show how to replace the paper feeding housing and the spring from the housing.

Partes

No se requieren partes.

  1. Flip printer on its back to expose the paper feeder housing. Flip printer on its back to expose the paper feeder housing. Flip printer on its back to expose the paper feeder housing.
    • Flip printer on its back to expose the paper feeder housing.

  2. Remove both of the #1 Phillip  10 mm screws. Remove both of the #1 Phillip  10 mm screws. Remove both of the #1 Phillip  10 mm screws.
    • Remove both of the #1 Phillip 10 mm screws.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Now with both screws out, remove the paper feeding housing from the printer. Now with both screws out, remove the paper feeding housing from the printer. Now with both screws out, remove the paper feeding housing from the printer.
    • Now with both screws out, remove the paper feeding housing from the printer.

  5. Compress and remove spring from paper feed housing. Compress and remove spring from paper feed housing. Compress and remove spring from paper feed housing.
    • Compress and remove spring from paper feed housing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jerome Etten

Miembro Desde 04/10/18

505 Reputación

4 Guías creadas

Equipo

UW Stout, Team S6-G4, Ogden Fall 2018 Miembro de UW Stout, Team S6-G4, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G4

4 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 16

Todo El Tiempo: 87