Saltar al contenido principal

HP G60T-600 CTO CD Player Replacement

Qué necesitas

  1. HP G60T-600 CTO CD Player Replacement, Battery: paso 1, imagen 1 de 1
    • Failure to remove the battery before performing any replacement guide may result in electric shock.

    • Close your device, then turn it over.

  2. HP G60T-600 CTO CD Player Replacement: paso 2, imagen 1 de 2 HP G60T-600 CTO CD Player Replacement: paso 2, imagen 2 de 2
    • Place your index finger on the ridged tab.

  3. HP G60T-600 CTO CD Player Replacement: paso 3, imagen 1 de 1
    • Apply moderate pressure to the tab and slide it to the right.

    • While the tab is on the right, you should be able to gently slide your battery out of your device.

  4. HP G60T-600 CTO CD Player Replacement, Keyboard: paso 4, imagen 1 de 2 HP G60T-600 CTO CD Player Replacement, Keyboard: paso 4, imagen 2 de 2
    • Unscrew the following 5mm screws with a #0 Phillips screwdriver.

  5. HP G60T-600 CTO CD Player Replacement: paso 5, imagen 1 de 1
    • Turn your laptop over and open it up.

    • Grip your laptop firmly from both sides and use your thumbs to slide the keyboard towards the screen.

  6. HP G60T-600 CTO CD Player Replacement: paso 6, imagen 1 de 1
    • Pull up on the top of your keyboard with medium force. It should start to pop out.

    • A plastic opening tool may facilitate this task.

    • Run your hands underneath the edges of the keyboard until it is free from the device.

    • Do not pull hard to take the keyboard out. There is a small connection that needs to be undone.

  7. HP G60T-600 CTO CD Player Replacement: paso 7, imagen 1 de 2 HP G60T-600 CTO CD Player Replacement: paso 7, imagen 2 de 2
    • Place your thumbs on the two small, white tabs.

    • Push these tabs forward to release the connection and free the keyboard from the device.

  8. HP G60T-600 CTO CD Player Replacement, Power Button Frame: paso 8, imagen 1 de 1
    • Similarly to how you remove the keyboard, gently pry a small section of the power button frame up.

  9. HP G60T-600 CTO CD Player Replacement: paso 9, imagen 1 de 2 HP G60T-600 CTO CD Player Replacement: paso 9, imagen 2 de 2
    • Gently pull the white tab upwards.

    • With similar force, pull the connection out.

    • You are now free to pull the power button frame off of your device.

  10. HP G60T-600 CTO CD Player Replacement: paso 10, imagen 1 de 1
    • Unscrew the 5mm screw holding the CD player in place.

  11. HP G60T-600 CTO CD Player Replacement, CD Player: paso 11, imagen 1 de 3 HP G60T-600 CTO CD Player Replacement, CD Player: paso 11, imagen 2 de 3 HP G60T-600 CTO CD Player Replacement, CD Player: paso 11, imagen 3 de 3
    • Slide the CD player case away from the device with medium-hard force, it should come right out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

UMass Dartmouth, Team 4-5, Catania Fall 2016 Miembro de UMass Dartmouth, Team 4-5, Catania Fall 2016

UMASSD-CATANIA-F16S4G5

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 101