HP Envy x360 m6-aq005dx Back Panel Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

Most of the replaceable components in a laptop is through the back panel. Therefore, this guide will show how to remove it properly.

Use the plastic opening tool to remove the gray rubber pads on the bottom of the laptop. For our device we only needed to remove the two at the top.

Use a plastic opening tool to pry open the case. Go slowly around the edge. You will hear popping noises, such are due to popping open the small joints that keep the cover attached.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Miembro Desde 10/10/17

711 Reputación

5 Guías creadas

USFT-CAGLE-F17S13G17

4 Miembros

7 Guías creadas