Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo using a Phillips #0 screwdriver.
-
Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To remove the back cover, use the black spudger to lift up on the edges of the cover.
-
Use a suction cup to assist in lifting the back cover
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the Philips #0 screwdriver to remove six (6) M2.0x3.2 screws from battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the Philips #0 screwdriver, remove the final screw from the battery connected to the SSD storage unit.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift and pull the front of the battery up and out (away from the connector) to remove.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a Philips #0 screwdriver, remove the three M2x4 screws located around the cooling fan as shown in this picture.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four spring loaded screws with a Philips #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a Phillips #1, remove the seven M2.0x3.2 screws.
-
Undo the six connections using the blue opening tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the aux port from the frame of the computer as shown.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the mother board up and away from frame of the computer.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Un comentario
hi so i was woundering about the start button , mine is broken , is there a way to start uo the pc and can i hook up a poer button some how to start it up thanks