Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo using a Phillips #0 screwdriver.
-
Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To remove the back cover, use the black spudger to lift up on the edges of the cover.
-
Use a suction cup to assist in lifting the back cover
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the Philips #0 screwdriver to remove six (6) M2.0x3.2 screws from battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the Philips #0 screwdriver, remove the final screw from the battery connected to the SSD storage unit.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift and pull the front of the battery up and out (away from the connector) to remove.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.