Repara tus cosas Comunidad Tienda

HP Envy m6-n010dx RAM Replacement

Introducción

This guide demonstrates how to properly remove the RAM of a HP Envy m6-n010dx.

Qué necesitas

  1. HP Envy m6-n010dx RAM Replacement, Battery: paso 1, imagen 1 de 3 HP Envy m6-n010dx RAM Replacement, Battery: paso 1, imagen 2 de 3 HP Envy m6-n010dx RAM Replacement, Battery: paso 1, imagen 3 de 3

    • Find the battery removal slider.

    • Slide it across while simultaneously popping out and removing the device's battery.

    Editar

  2. HP Envy m6-n010dx RAM Replacement, Hard Drive: paso 2, imagen 1 de 1

    • Remove the five marked screws found under the battery using a philips head screwdriver.

    Editar

  4. HP Envy m6-n010dx RAM Replacement: paso 3, imagen 1 de 2 HP Envy m6-n010dx RAM Replacement: paso 3, imagen 2 de 2

    • Remove the small panel on the back by prying it off. This should reveal the hard drive.

    Editar

  5. HP Envy m6-n010dx RAM Replacement: paso 4, imagen 1 de 3 HP Envy m6-n010dx RAM Replacement: paso 4, imagen 2 de 3 HP Envy m6-n010dx RAM Replacement: paso 4, imagen 3 de 3

    • The hard drive is connected to the motherboard via this blue-tabbed cable, highlighted in red.

    • Gently pry off the cover to release the cable.

    • Slowly lift the hard drive out and away from the device.

    Editar

  6. HP Envy m6-n010dx RAM Replacement, RAM: paso 5, imagen 1 de 3 HP Envy m6-n010dx RAM Replacement, RAM: paso 5, imagen 2 de 3 HP Envy m6-n010dx RAM Replacement, RAM: paso 5, imagen 3 de 3

    • Remove the highlighted screws

    • Pry off the lower two grip pads

    • You may need to use more force than feels necessary

    • Remove the two additional screws underneath the lower grip pads

    • Remove the large back panel to reveal the inner workings

    • The back panel might be difficult to remove. Use a flat object to help pry it off, and don't be afraid to use force.

    Editar

  7. HP Envy m6-n010dx RAM Replacement: paso 6, imagen 1 de 3 HP Envy m6-n010dx RAM Replacement: paso 6, imagen 2 de 3 HP Envy m6-n010dx RAM Replacement: paso 6, imagen 3 de 3

    • Pull back the black rectangular cover to reveal the RAM

    • Unclip the metal restraints on the side to pop out the RAM

    • Repeat the previous step for the second RAM below

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 295