HP Envy m6-k022dx Speaker Replacement - Guía de reparación iFixit

Qué necesitas

Paso 1 Lower Case

HP Envy m6-k022dx Speaker Replacement, Lower Case: paso 1, imagen 1 de 1

There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.

Paso 2

HP Envy m6-k022dx Speaker Replacement: paso 2, imagen 1 de 1

Next, use a size PH1 Philips head screw driver to remove the screws.

Paso 3

HP Envy m6-k022dx Speaker Replacement: paso 3, imagen 1 de 1

Then, use a prying tool to help uncouple the backplate.

Paso 4

HP Envy m6-k022dx Speaker Replacement: paso 4, imagen 1 de 1

Finally, use both hands to lift up and take off the back plate of the computer.

Paso 5 Speaker

HP Envy m6-k022dx Speaker Replacement, Speaker: paso 5, imagen 1 de 1

Remove the two screws holding the speaker in place.
There are two red rubber grommets which stay situated in the screw guide holes; be sure not to lose these.

Paso 6

HP Envy m6-k022dx Speaker Replacement: paso 6, imagen 1 de 1

Once the screws have been removed, gently lift the speaker straight up, but just enough to dislodge it.
There is a cable connecting the speakers to the sound board. Be sure to not tug on this connection when lifting the speaker.

Paso 7

HP Envy m6-k022dx Speaker Replacement: paso 7, imagen 1 de 1

Once the speaker is dislodged, gently pull the connecting cable from the sound card.
The speaker is now fully removed and ready to be replaced.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Kareem Rigaud

Miembro Desde 03/02/17

403 Reputación

3 Guías creadas

+ 4 más insignias

Equipo

USF Tampa, Team S13-G6, Cagle Spring 2017 Miembro de USF Tampa, Team S13-G6, Cagle Spring 2017

USFT-CAGLE-S17S13G6

3 Miembros

6 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 12

Todo El Tiempo: 674