Saltar al contenido principal

HP Envy m6-k022dx RAM Replacement

Qué necesitas

  1. HP Envy m6-k022dx RAM Replacement, Lower Case: paso 1, imagen 1 de 1
    • There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.

  2. HP Envy m6-k022dx RAM Replacement: paso 2, imagen 1 de 1
    • Next, use a size PH1 Philips head screw driver to remove the screws.

  3. HP Envy m6-k022dx RAM Replacement: paso 3, imagen 1 de 1
    • Then, use a prying tool to help uncouple the backplate.

  4. HP Envy m6-k022dx RAM Replacement: paso 4, imagen 1 de 1
    • Finally, use both hands to lift up and take off the back plate of the computer.

  5. HP Envy m6-k022dx RAM Replacement, RAM: paso 5, imagen 1 de 1
    • The RAM sticks are located in the right upper corner of the laptop of the laptop.

  6. HP Envy m6-k022dx RAM Replacement: paso 6, imagen 1 de 1
    • There are two clips holding each RAM stick in place; one on each side of each stick.

    • Gently pull each clips outwards, away from the RAM sticks. They will easily unclip from the RAM.

  7. HP Envy m6-k022dx RAM Replacement: paso 7, imagen 1 de 1
    • Grab the top of the RAM stick and pull directly up, towards the outer edge of the laptop.

    • The RAM sticks will slide out from their slots relatively easily. They are now ready to be replaced.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Anthony Stubbs

Miembro Desde 04/06/17

182 Reputación

1 Guía escrita

Equipo

USF Tampa, Team S13-G6, Cagle Spring 2017 Miembro de USF Tampa, Team S13-G6, Cagle Spring 2017

USFT-CAGLE-S17S13G6

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 1,109