Introducción
Removing the back panel is the necessary prerequisite for replacing many of the components of the HP Envy Touchsmart m6-k125dx. It is the part that covers the inside components and is held together by several screws underneath the laptop.
Qué necesitas
-
-
Turn the laptop over so that the bottom is facing up
-
Using the J0 screwdriver, unscrew all 12 M2.5x5.5 screws from the back panel.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Equipo
University of North Texas, Team S1-G1, Thompson Fall 2017 Miembro de University of North Texas, Team S1-G1, Thompson Fall 2017
UNT-THOMPSON-F17S1G1
4 Miembros
5 Guías creadas
