Saltar al contenido principal

Introducción

This guide will help you in replacing the touchpad on your HP Envy Sleekbook m6-k010dx. Make sure to turn the device off before doing anything.

Partes

No se especificaron partes.

  1. Remove the twelve 9 mm Phillips #00 screws.
    • Remove the twelve 9 mm Phillips #00 screws.

  2. Use the plastic opening tool and your hands to remove the bottom cover. Use the plastic opening tool and your hands to remove the bottom cover.
    • Use the plastic opening tool and your hands to remove the bottom cover.

  3. Disconnect the battery power cable from the motherboard.
    • Disconnect the battery power cable from the motherboard.

  4. Remove the six 6 mm Phillips #00 screws from the battery.
    • Remove the six 6 mm Phillips #00 screws from the battery.

  5. Lift the battery out of the laptop. Lift the battery out of the laptop.
    • Lift the battery out of the laptop.

  6. Lift the white tab on the ZIF connector to unlock the ribbon cable.
    • Lift the white tab on the ZIF connector to unlock the ribbon cable.

    • Pull the ribbon cable out of the ZIF connector.

  7. Remove the seven 3mm Phillips #00 screws from the trackpad.
    • Remove the seven 3mm Phillips #00 screws from the trackpad.

  8. Use the plastic opening tool to lift the touchpad up and pull out to remove.
    • Use the plastic opening tool to lift the touchpad up and pull out to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

codi whittaker

Miembro Desde 14/02/18

433 Reputación

3 Guías creadas

Equipo

USF Tampa, Team S1-G4, Nance Spring 2018 Miembro de USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 10

Todo El Tiempo: 149